Category Archives: posts

Easy Ways to Offset your Carbon Footprint Starting Today

There are a lot of ways that you can move forward with helping the earth. Going green is not an impossible task, mind you. Many people think that it’s hard to reduce a carbon footprint. That’s not the case any longer. In fact, there are a lot of easy routes that you can progress with if you’re going to end up moving forward with going green today. Going green, and trying to help the planet takes a little bit of effort, but not more than you can pursue. If you want to end up with a great solution moving forward, the following will help you garner a bit of success within a short span time.

Changing The Way You Get Around

The first major thing to consider is how you get around. Seriously, take time to consider how you want to get around your town, and everywhere that you go. If you focus on this, you’re going to end up with a big push forward in how you reduce your carbon footprint. People today assume that they have to drive, and that’s not true. You can get away without driving as much, and the following ways can help you get that done.

Alternatives abound in terms of driving. You could use the option of carpooling with co-workers. If you live near any of your coworkers offer to drive to work together, or have them drive you, and pay a little for gas. Together you can ensure that you’re helping with reducing your carbon footprint. This is not a difficult task, you just have to talk to some people. If you aren’t keen on this, you could always go with a bus. Bus passes can pay for themselves within a few rides, and you could end up getting to and from a lot of different areas, and not have to worry about driving at all. You could take a nap, read a book, or just listen to music and let someone else do the driving, and still remain safe, and get to where you need to go within a short span of time. Trains, buses, and all other forms of public transportation are great alternatives to driving and could help you save money, as well as reducing your carbon footprint.

Work On Your Home’s Interior

The next round of changes that you can start to work on is in the home. You could work within the confines of a lot of different things and end up with a positive push forward in terms of going green. The goal here is simple, make sure that you change things up to ensure that you’re using less energy. You can do this by focusing on a few key elements of change.

The best option to pursue here is to look into the solutions that are going to be easiest and work your way out to more complex elements. For instance, you can start to reduce your cooling and heating costs by insulating your home. This is not a complicated thing, you just have to look for drafts and anywhere that has air and heat escaping. You could purchase a caulking gun, and some caulk, and reseal areas that have lost their weather stripping or have been faded with weather. You could also upgrade your windows, insulate your garage, basement, attic, and other areas of your home as well. Upgrading to more insulation or even changing out windows and doors can very well save you money in the long term, and in some instances, could garner you tax breaks as well.

Change The Appliances That You Have

One of the best things that you can do to help with reducing your carbon footprint is to invest in energy star rated appliances. These are appliances that have passed through the star rating system and means that they consume a lot less energy than other options do. This is a great option to pursue, and in some instances, can cost very little to change over to a high-efficiency appliance. There are several solutions here, including washers, dryers, dishwashers, and so much more. You do not need to spend a lot of money here, you can easily get a solution that is low cost, and efficient overall. At the end of the day, you’re going to find that appliances are one way to ensure that your home is efficient, and you’re reducing the carbon footprint that you’re putting out there.

Eat and Shop Differently

Did you know that you can help the environment by eating certain types of foods? That’s correct, you can easily work with a focused energy that will help you save the planet, and eat well. The goal here is simple, offset the amount of pollution that you’re going to be investing in by buying differently. The easiest way to do this is to eat organic, locally grown foods. That means that they will have traveled less miles to get to you, and they will help your local farmer as well.

Another solution that you can invest in is buying less beef and dairy overall. These things can take up a lot of resources to grow and maintain. Not only that, there’s a lot of foreign countries now shipping their items to the United States because the grazing land that was one prevalent in the United States is getting lower and lower.

Limit The Hot Water That You Use

There is an easy way to stop using so much water in your home and it’s to bathe differently. Instead of taking long showers or baths, take shorter showers and stop getting into the tub so much. Aside from that, you should look at using cold water whenever you can. This includes washing your clothing in cold water, and of course your dishes as well. If you can stand to take cold showers, that will help as well. Your goal is to reduce your carbon footprint, and heated water can waste a lot, so make sure that you take your time and use less of it, and when you can, don’t use hot water.

The Top Polluted Cities in the World and Why

Today, around the world there are a lot of different countries that are absolutely awful when it comes to living conditions. This is not to say that they are in developing areas, but rather they have a great amount of pollution. Today, there are a lot of polluted cities, some of which are absolutely terrible to be around. If you’re looking at the most polluted cities in the world, then you’ll want to see the following list of options that are ranked as the worst of the bunch. These are the worst cities in regard to pollution and it seems to be something that has no end in sight. These are based on rankings as of 2018, but there could always be shifts here and there, of course.

Zabol, Iran

The main reason why there’s a great deal of pollution here is that of the dust storms that hit the Arabian desert. The desert creates a great deal of dust and hits with meteorological elements that damage the city and the lungs as well. The dust can be quite immense, and the pollution can make sunny days look brown, and hard to see through. Within a few hours of breathing the elements, asthma, and other lung infections can form.

Gwalior, India

Another very polluted city that you will find to be ranked on nearly every list and one that is not going to have much help in terms of pollution is that of Gwalior. This is a city in India that has been ranked as one of the most polluted in the world. The reason why this is true is because of population density at first. Aside from the population density, you’ll find that a large amount of burning garbage piles, and fossil fuels leave a lot of contaminants in the air, which don’t seem to drop at all. The hazardous air is one thing, but the constant hustle and bustle in this city cause a great deal of smoke, and pollution to be prominent throughout the city.

Allahabad, India

India has another city on this list that you will want to consider overall. This Indian city has a great deal of pollution due to the coal burning that goes on in the city. The city has a great deal of coal-burning plants, and if that’s not enough, the population also plays a role. The population creates a lot of vehicular emissions, alongside the lack of vegetation and more. A great deal of deforestation has caused a great deal of change here, and if that’s not enough, there’s a great deal of dust that comes through as a result. Mixing population density, wind patterns, and the coal-burning plants all combine for a difficult run up against pollution. There seems to be no end in sight, either.

Riyadh, Saudi Arabia

Focusing on the Middle East again, you’ll find that there is a severe amount of pollution in the city of Riyadh. This city has a lot of sandstorms that come through thanks to the Arabian desert, but aside from that, you’ll find that there’s a bit more to be concerned with. The factories and vehicles that are going through the city also send out a lot of particles that go into the air, and much more. Saudi Arabia has seen a great deal of changes and focus that have contaminated the air, and without a great deal of forestry to break up the dust, you’ll find that it can be hard to inhale, etc. This is ranked as one of the top polluted cities in the world on many different levels, that’s for certain.

Bamenda, Cameroon

Focusing on a new solution, you’re going to find that Cameroon has a great deal of trouble in terms of pollution. Bamenda, Cameroon is a city that has a great deal of trouble and it starts with the fact that the country and city has seen a lot of deforestation. Not only has a lot of the forestry been cut down, the weather patterns have caused the wind to pick up on emissions and more that cause the air to be in poor quality often. Not only that, poverty, and lack of industrialization has also caused a great deal of problems as well. Bamenda’s shift in weather is one reason to cause alarm, but there’s a lot more to consider as well, as this is a city that has a great deal of pollution in the air, and not a whole lot to stop it.

Xingtai, China

With the push forward of industry, also comes pollution in many instances. One of the most polluted cities in the world is that of Xingtai. This is a city in China that has seen a big boost in a lot of ways. The industries here that have been pushing forward progress have also allowed a great deal of pollution into the air, and that’s causing serious problems in terms of the water, and the air quality alike. With that in mind, the main reason why pollution keeps coming through is due in large part to the industrial steel manufacturing plants that line up this area. They bring about a great deal of pollution to the city, and there seems to be no end in sight.

Kampala, Uganda

Speaking of pollution, you’re going to find that Uganda has a serious issue as well. Kampala is a city that has a great deal of pollution and seemingly no end in sight. Since 2016, the emission levels from cars and other vehicles has been astronomically high. Unlike other large cities around the world, there are no emissions standards or anything that is cutting down on the pollution, making this a serious threat to the air quality in and around the city of Kampala.

As you can see, there are a great number of polluted cities today. It’s something that is simple to find when you start digging a little deeper. It’s a serious problem that most don’t even realize is continuing across large cities around the world.

How Bitcoin Mining is Impacting the Environment

Ever since digital currencies have been introduced, millions of people have started mining. Mining is a process that works to get a great deal of digital currency through the use of energy consumption and what is known as “miners”. These are computer-based programs that are simple to work with and easy to run through but can bring about mixed results. With the added usage of these things, many people are starting to take an impact on the environment and not even know it. You may not think that these things can do anything, but the more that Bitcoin and other currencies get popular, the higher the chances are that you’ll end up with a serious push in the wrong direction, at least in terms of going green.

How exactly could something like Bitcoin mining cause any impact on the environment?  Well, you’ll need to consider a few notes in regards to this issue and how the world could find itself at odds with miners and those that are trying to get their fair share of digital currencies, including that of the most popular, and most expensive option, Bitcoin.

What Exactly Is Bitcoin?

Before you can move forward with a global impact solution, you need to know what exactly is Bitcoin. This is the first and most prominent of digital solutions. The easiest solution to consider is simple, it’s a computer code. When an owner transfers currencies between another person, you’ll find that the computer code allows for digital ledger marks. In the last year, the digital currency world has been thriving, and at the time of this writing, Bitcoin is worth a great deal of money, thousands even. While some analysts are saying that this is a temporary jump, others are saying that there is a lot that goes into this, and could very well be the future of currency overall.

But What About The Mining?

Well, unfortunately, there is a big push against the environment. The sustainability issue of Bitcoin is due to the process that is centralized to the retrieval of the digital currency overall. Mining requires a great deal of power, and the standard computer will overheat when running through the algorithm overall. The miners that people are using today use a specific math equation to try and run down the complicated calculations and create transactions that will eventually add up to Bitcoin.

There’s a great deal of energy that comes with moving through the mining process, and the most powerful computers that can run the software can cause a great deal of energy consumption. Now, multiply that by a great number of miners, and you start to see why it could be an impactful thing. At the time of this writing, economists have stated that the power consumption is quite high within the confines of this solution. The rise of the number of computers needed to get Bitcoins completely has created a great deal of power consumption that wasn’t there beforehand.

What Do Experts Say About Energy Consumption?

Let’s take into consideration what economists say about the world of Bitcoin. Economists have talked about the focused approach of mining and how powerful it could very well be. It’s hard to make certain estimates about just how much power is being consumed overall, but you’ll find that there are a few notes that point towards the sheer number of watts utilized for this solution overall.

According to news media, even with the most efficient of computers today, the amount of energy being consumed by mining alone could be around 13 terawatt hours. That’s on any given day, with multiple hours of mining on a regular basis, and that’s a powerful amount of energy overall. The energy consumption here is compared to what you would find in Ireland or even Slovenia. In regards to the energy element of Bitcoin, the average is focused on about 0.7% of the total energy consumption of the United States.

That may not seem like a lot, but it certainly is a lot when you think about the larger picture associated with Bitcoin. As more and more people start mining, the power usage will rise overall. You’ll find that in regards to the power consumption that is being used within this framework, 0.7% is a big number, and will only grow.  According to experts today, you’ll find that growth ratios of mining have grown by more than 1/5 over the course of 2017, especially towards the end of the year.

Even Bigger Numbers

It’s not just a few analysts that have been thinking about Bitcoin mining and how the power consumption is being driven. There’s been a lot of focus on this, from organizations like The Bitcoin Energy Consumption Index, which has shown that there’s a lot of mining going on. To the point that you’re going to find that the mining element consumes more energy than more than 150 countries today. To ensure the numbers are somewhat easy to understand dis simple, you’ll find that the amount of power used to fund mining, you’ll find that it can run roughly 10 households for a day. They have been pushing forward with the notion that they would get 29.05 TWh.

The Future of Bitcoin

What you are going to find to be true about Bitcoin is that it’s growing. The interest in mining continues to grow and will not stop any time soon. As people are seeing a great deal of money coming through with the investments on digital currencies, it’s no doubt going to continue to generate a lot of attention.

In terms of energy consumption, there are a lot of computers that are being sold and are focused solely on the element of mining, and getting currencies that are digital in nature. That includes Bitcoin. This could very well be one of the major impacts on the grid. The grid is fine, but you’ll find that there’s a lot of elements that come to this, and well, while there are benefits to this, you’ll find that digital currency may not last as long as some would wish, but for now, analysts are stating that it’s pushing a great deal of energy.

Best Apps to Track Daily Energy Usage

Best Apps to Track Daily Energy Usage

Today more than ever before, you’re going to find that there are a lot of different ways that you can track energy usage. Tracking energy is a good thing, as it could help you go green, and assist the environment. Also, you could end up saving a lot of money, helping the environment, and so much more. If your goal is to focus on tracking daily energy, you’ll want to look into a few notes on what apps can help you with daily energy usage.

As with anything that you will find today, you’ll find that there are a lot of different things that can help you track energy consumption, apps, and more. Technology can come through and help you with a lot of upgrades, and could very well save you money today. If you’re looking at saving money, going green, and more, you’ll want to look at the following apps that can provide you with the right information. These are simple to work with and can be used within a few minutes to help you find what you’re doing right, what you may doing wrong, and what can help you with more efficient living today. Looking online for things like green app, is a good way to move forward, but you’ll find that this is a difficult thing to work with, and could have a lot of options to run down with. As a result, the following are the best solutions to look into right now.

Green Outlet

Going green has never been easier, and with the highly reviewed Green Outlet app, you could very well figure out what is going on with your energy consumption and more. The app helps you with figuring out which of your home appliances are sucking up the most electricity, and more. After you download the app, you will be able to enter a few personal elements, and figure out what you are spending on average, per month. You can calculate the monthly rate, per day, and average of what you’re dealing with in terms of carbon usage. If your goal is to ensure that you’re going green and making moves, than this app is going to help you get the right framework, moving forward. The goal of course is to ensure that you are in the know of what energy consumption you’re dealing with, and well, that is a matter of factoring very specific, personal information. Some don’t like that, but it’s going to allow you to figure out the dollars and cents of this solution overall.

Energy Cost Calculator

Those that are using iOS, you’ll find that you can use this option with relative ease. This is a cost option that will help you calculate energy costs and break down a lot of different equations regarding what energy consumption you’re really facing in your home today. What’s great about this well-reviewed app is that you will be able to break down a number of different elements overall. This app tracks costs per day, week, month, and year, and you can focus on how that all breaks down based on the money you’re spending for energy per month. Simply put, this is a tracker that is going to help you establish the right way to budget your energy, as it will show you where it’s going and how much you’re paying as a result. Simply put, this is a great option to consider overall.


Another great app to consider focusing on energy consumption overall is that of the Smappee app. The goal of this app is to look into the associated costs of using energy on a regular basis. You will once again have to add a few notes to figure this out, but the main focus is to look into how you are using your energy, and what you’re paying for it. The cool thing about this application is that it can help you in real time. That’s right, it analyzes home energy usage for 30 days, and can give you up to the minute solutions with a few clicks. This app allows you to ensure energy consumption that you are having in the home, thanks to appliances and much more.

Power Cost Monitor

Homeowners that want to focus on power consumption will enjoy this app and how it can help with all sorts of energy solutions. This is an app that focuses on energy consumption with the information that is available to homeowners. It can work in real time as well, but like other apps on this list, requires a bit of information to be placed into the app for it to work. There are several options that are tied to this application, and you’ll find that it can help with energy usage information, as well as cost break downs in a lot of different arenas. If you want to save money, and want to ensure that you will be able to navigate energy consumption and usage, this app will definitely help you get the right information, fast.

Nest Mobile

There are a lot of people that will purchase the Nest Learning Thermostat, and that’s a good thing. Alongside that comes Nest Mobile. Nest Mobile is a good solution and it is easy to work with. This can help you with complete control over all of the energy consumption that you have in the home. The app will also give you a rundown of energy usage across your history, and the area that you’re in. If will show you what temperatures that you’re running within your home, and will make automatic adjustments and more.

At the end of the day, you’re going to find that there is a lot of options to explore in terms of technology and green app solutions.  You can always look online for things like, green app, but you’re going to find that there are just so many listings today, that it’s easier to get a rundown of the best. The above options are some of the best right now, but there could always be more coming through app stores of all types.

An Expert Guide To Recycling

An Expert Guide To Recycling – The Easiest Steps

One of the tried and true ways that you can help the environment today is to look into ways that can help you recycle. If your goal is to go green, but you don’t know where to start, or perhaps you just want some ideas on how to help lessen your carbon footprint, you’ll want to take a few notes in regards to how to recycle. Recycling is a great way to get forward progress, and it’s not that complicated. Sure, some cities allow for easier processes, but overall, you don’t need to go to an official location to get started with this. If your goal is to get going green, think about doing the following things.

Assess What You Want To Recycle

Before you can go forward with any solution, you need to think about what you want to recycle. What do you want to move forward with? Think about this for a moment. Is there a plan that you want to approach, or do you just want to simply want to get started? Are you looking to do something long-term, or just don’t want to throw out certain things?

Assessing what you want to do in terms of recycling is going to help you figure out what option is best for your needs. This may be a little difficult to manage at first glance, but the more you think about this, the larger an impact you’re going to be able to produce. Simply put, this is a great option to pursue, and something that most people don’t really think too much about, but it’s imperative. Assess what you want to recycle, then focus on doing the following things.

Shopping First

The first thing that you need to do is simple, start shopping for things that are 100% recyclable. Not everything that you may have will be recyclable, and not everything that you buy will be able to lessen your impact. To make sure that you are able to gain momentum, focus on shopping first. Look for items in the grocery store that are 100% recyclable. These are going to help you make sure that you’re able to gain momentum in your quest to recycle items. If you buy things that are accepted in terms of recycling, then the rest will be so much easier to manage.

It’s not just a matter of buying recyclable items, either. You’ll want to look for items that have been made from recycled and upcycled materials. That includes paper products, plastics, and so much more. Get in the habit of reading labels, and seeing what is available to you in terms of shopping, and you’ll end up with a good bit of focused energy towards recycling.

Use A Separate Bin For Recyclables

If you own a home, then you will be given a recycling bin. Make certain that you use this properly. In some areas, there will be a few bins. If you have more than one bin, use them properly. That means separating aluminum, glass, and paper products. If you are living in an area that requires this, don’t forget to sort things out before you put them out on the curb. If you don’t live in an area that requires separation, then you will want to use your recycling bin with the right parameters. Make sure that you only add things that are 100% recyclable according to your local jurisdiction. In most cities, and communities, you could put glass, cardboard, and much more. Separating things will help you dividing things up, but again, that is only if your city requires it.

Locating Recycling Companies

For those that don’t live in houses, but rather rent, or don’t have any recycling that is automated by the company, then it’s important to go a different route. The next big thing that you can do is locate local recycling plants in your area. Every major city has these. Some companies will take your goods and give you a receipt for them, and others will give you cash.

In cities where there are cash back options, you can earn as much as 10 cents per item, and that’s something that you will want to explore. If you have a local recycling center, then, by all means, go to them and use their services. Take the items that you have in your home, separate them from the garbage, and then bring them to your local recycling center for profit and to just go green. You’re going to find that this solution is easy, and is located in nearly all major cities. If you’re not sure where to even start, you can look in your local phone book for recycling centers, or you could type this into a Google search engine and find what is available in your town.

More Than Cans, Bottles, and Paper

For those that want to recycle other things, you can look into a variety of different options. For the purpose of getting rid of building materials, batteries, and computer systems, you’ll need to find specific areas that dispose of these things properly. E-waste is very important in terms of recycling and using correctly. You do not want to throw these things out into the dumpster, as they may have poisonous materials in them, and that can cause a great deal of problems overall.

Start Working To Collect Items

For those that want to recycle and get more involved, your best bet is to look into asking neighbors and your community to put recyclable goods into specific bins. You can even collect them or set up a network that can assist you with this project. As long as you are looking to help the environment, recycling can be very easy. You can find local facilities, businesses, and even trade in options for cash in certain areas. This may be the easiest way to get involved with going green, especially since this is a solution that has been going strong for many years. It’s easier than ever to recycle, that’s for sure.

Electricity Pylon

Electric Vs. Gas Central Heating Cost and Energy

Electric heaters may be in form of radiation or convection heaters. Radiation heaters produce warmth through infrared radiations from a heating element inside a glass envelops. They are usually equipped with reflectors that direct heat away from the heater to desired body. They are mostly appropriate for warming focal points. Convection heaters on the other hand provide warmth by heating air that rises up leading to a constant flow of warm air within the room. They are suitable for heating closed spaces such as rooms, homes and houses. A centralized heating system works by passing an electric current through a heating element whose resistance causes it to heat up and radiate heat into the adjacent air. It is equipped with a fan, which forces the transmission of warm air via tubes to other rooms.
A central gas furnace works by burning a gas, in form of propane or natural gas, using flame that heats air passing over it. There is a fan inside blowing the heated air through duct to other rooms in the home while the by products are passed out through the chimney while fresh air gets back to the furnace and is heated again and sent through the tubes. Gas heaters are usually of two types. Flued heaters are installed permanently at correct heights to extract all the gases that are emitted. Flueless heaters are vent-free and usually used in rooms with good ventilations. The sources of gas could be the mains, LPG gas or bottled gas.

Installation Costs

Installation costs of gas heaters are comparatively higher to electric heaters since they require specialized expertise and more expensive materials. Installation requires a chimney that sends out the combusted gas, air channels through which the gases and air pass as well as a centralized furnace that combusts the gas and heats the air. Installation of a centralized electric system requires an electric furnace which heats up air as well as pipes which move the heated air to other rooms. The cost of an electric furnace is relatively cheaper, making its installation fairly affordable. It is estimated that the average installation price of a gas furnace ranges between 1500-3000 pounds while that of an electric furnace is between 600-700 pounds.

Operational Costs

Gas heaters are said to produce a higher amount of energy compared to electric heaters in the same amount of time. This is because the gas is burned which produces a flame that heats air, which is spread through convection while in electric heaters; the heating element has to get hot first before it starts emitting heat. For heat to be produced, a lot of energy has to be consumed to be able to exceed the electrical resistance. Gas is also cheaper compared to electricity making operating costs of gas heaters cheaper in the long run. In UK for example, the cost of one unit of gas is about 4p for every kWh while that of electricity is 15p for every kWh. The cost of using electricity for centralized heating ends up having an overall cost of about three times more than that of gas However, electric heaters have proven to be cheaper when heating a small room at reduced temperatures. Gas heaters are therefore suitable for heating larger homes as the warm is easily transmitted to other rooms via the constructed channels; or within the same room through convection. The lifespan of electric heaters is however greater than that of gas heaters. The probability of changing equipment is low; these further hike up the maintenance costs of gas heaters associated with swapping of older equipment with the newer ones.

Environmental Cost

Despite their energy efficiency, electricity generating power plants produce considerable amounts of pollutants such as greenhousegases, which are hazardous to the environment and animal life. The heating elements in electric heaters provide warmth by radiation and convection that is accompanied by production of carbon dioxide. Gas heaters produce less carbon dioxide than electric heating; however, incompletely combusted gas may emit nitrogen dioxide and carbon monoxide that pose a danger to health such as asphyxiation and carbon monoxide poisoning.

Energy efficiency

Electricity is readily available anywhere and can be easily utilized. The electric heaters are known to be very energy efficient, using up to 100% of the energy to provide heating. This means that all the energy that goes into a heater is not wasted,but comes out as heat. This is applicable to those heaters using the aid of a fan to spread the heat around, convection based heaters that spreads the heat through radiant energy or a centralized heaters that spread the warmth to other rooms by pipes making them ultimate energy savers. Electric heaters don’t require stored fuel to generate heat; they work immediately they are plugged into the electricity mains.
Gas heaters cannot be used everywhere due to the unavailability of gas in some areas. They are less efficient compared to electric heaters as they utilize about 80-90% of the energy andlosing about 10-20% to the surrounding. Gas efficiency can however, be improved by weather-stripping, which eliminates leaks of gases. The heating system should also be turned off in unused rooms to avoid unnecessary loss of energy. Professional servicing could also be sought to fine tune and inspect the furnace. These professionals should also check for other abnormalities such as cracks within the unit, pipe obstruction, loose wires, blower flaws, malfunctioning safety switches, thermostat problems, faulty ignition components, damaged capacitors and low gas pressure. Proper maintenance of gas heaters increases their durability and efficiency.
Energy efficiency of both electric or gas heaters can be optimized by incorporating them with a thermostat. The thermostat regulates the room temperature by turning the heater off when it’s too hot and on when the temperature is getting low; this also minimizes continuous running and saves on energy costs.

Energy Saving Lightbulb

Why Use Energy Saving Light Bulbs?

Compared to old incandescent, Energy saving bulbs consume up to 80% less energy and produce same or better amount of light. Use of these bulbs will ensure more saved money and energy and less carbon dioxide emissions that cause climate change.
According to research findings, just one bulb replacement with an energy saver saves an average of £5 a year. And this figure rises with more bulb replacements. If more homes adopt this, more energy will be saved and money initially spent on energy used in other activities.
Initial use of inefficient halogen light bulbs and traditional incandescent bulbs is being overtaken slowly by the introduction of more efficient energy saving bulbs which are environmental friendly. Together with the government, energy regulatory companies and retailers are working together towards a common goal of phasing out the use of inefficient bulbs and as a consumer, you need to complete the cycle by embracing the use of this bulbs.

Types of energy saving bulbs

Three most common types include; Halogen Incandescent, Compact Fluorescent Lamps (CFLs) and Light Emitting Diodes (LEDs)

I. Halogen incandescent

For efficiency, the incandescent bulbs are fitted with a capsule that holds gas around the filament. They are of different shapes, sizes and colors and can be used with dimmers. With regards to energy regulation, they meet the minimum energy efficiency standards.

II. The Light Emitting Diode (LEDs)

LEDs are semi-conductors that convert heat energy to light energy. Initially they were only used as indicators and traffic lights but their energy efficiency feature has made them better compared to traditional incandescent since they last up to 25 times longer. Consequently, they use only 20%-25% of the energy.
In as much as they are expensive, more money is saved since they last longer and consume very low energy. Also as more varieties enter the markets, and improved technology in manufacturing, prices are expected to go down. They are mostly of 40w, 60w and 75w.
LEDs, manufactured as small bulbs were first used for battery powered items e.g. headlamps and flashlights. Nowadays they are available with standard bases that fit to varied light fixtures.
There most important feature is them being directional and have diffuser lenses that disperse light more as opposed to incandescent bulbs
Owing to the use of cheaper silicon wafers instead of a more expensive sapphire technology in the production of LEDs, reduced costs are expected in the LED markets soon.

Why you should consider the use of LEDs

Long lasting; comparing them to typical incandescent bulbs, they last more than ten times longer.
Durable; this is due to the fact that they do not have a filament and can therefore not break under jarring and bumping conditions.
Cool; using the British Thermal Unit (BTU) where one BTU is equivalent to 1055 joules, LED bulbs only produce approximately 3 BTUs in an hour hence no heat build-up. Incandescent bulbs produce approximately 90 in the same time duration leading to heat build-up in a room and thereby more air conditioning costs.
No mercury; mercury when not properly disposed can cause health complications.
Efficient; in terms of watts, LEDs use as low as 2 watts to a maximum of 17 watts which is only 1/3 to 1/30 respectively of watts used by incandescent. In flashlight bulbs, they extend the battery life to fifteen times longer than incandescent bulbs.
Cost effective; initially, LEDs were considered expensive during purchase but taking into consideration their life span and battery savings, they are cheaper in the long run. Nowadays, the costs have considerably reduced due to more production and market influx.

Lighting for portable generators; LED bulbs are most ideal for homeowners with portable generators important for power backups and during emergencies
Remote area lighting; in remote areas where electricity is a problem, LED bulbs are the most ideal to use with solar panels or generators due to their low power requirements.

Choosing an LED Bulb

Because of market influx and availability of different products in the market, it’s important to have a guideline of what you should consider when purchasing an LED bulb. Basically understand lumens as a measure of brightness and choose a bulb with more light but consumes less energy. The following are other factors to keep in mind.
Desired Brightness; this information is contained in the package. Read and compare wattage. Currently, as a new measure, all bulbs display lumen information which measures brightness. The higher the lumen, the more will be the brightness.
Combination 3 way bulbs; three way bulbs replaced the 30w, 60w and 75w bulbs incandescent bulbs and consume up to 80% less energy. The Omni directional feature makes them usable everywhere the incandescent bulbs are used.
Type of light; do you require warm or cool light? Cool white light is essential for task lighting while warm light is for small area lighting. Choose as per requirement
Pin Base; standard and dimmable bulbs; choose the appropriate standard or socket ‘pin’ base. Consequently consider bulbs that will work with the standard dimmer switch.
Cost and certification; very low cost bulbs are low quality and contain a chip that fails easily therefore dying prematurely. LEDs should also be verified with energy stars.
Examples of LEDs include;

  • Diffused bulbs; are covered by a lens that helps in spreading light over a large area. They are suitable for large rooms and hallways.
  • Dimmable globe LED bulbs; dimmable from 100% to 10% and have up to 200 degree beam angle for casting light in broad, wide areas.
  • Track Lighting Pin Base; mostly available pin base is MR-16 and are ideal for track lighting. They last long and do not get hot to touch.

Others include flood reflector LED light bulbs, flame Tip, Candelabra Base LEDs and LED tube lights that replaced fluorescent tube bulbs.

III. Compact Fluorescent Lamps (CFLs)

CFLs are similar to long fluorescent tubes but are curly. Compared to traditional incandescent bulbs, they are more efficient and save more energy. Considering the little amount of electricity they use, it is estimated that they pay for themselves in around nine months and for each subsequent month, it will be money saved. On average, they last more than ten times and use only a quarter of the energy used by the traditional incandescent bulbs.
To take care of different tastes and preferences, CFLs are of different colors and have different features. Similar shape bulbs to the one you are replacing can be obtained and the different level of lighting they exhibit gives you the option of a brighter or dimmer bulb. They are also recyclable.

Why you should consider the use of CFLs

Less expensive; although a bit costly on initial purchase, less energy consumption means more energy and money saved.
Quality light; CFLs emit warmer, inviting light compared to ‘cool white’ light by traditional incandescent bulbs. Consequently, they don’t flicker nor hum.
Pollution; reduced carbon dioxide emissions from power plants mean reduced air pollution, reduced electricity consumption, reduced sulfur oxides and nuclear waste emissions.
Versatility; can be used anywhere; in recessed fixtures, track lighting, table lamps and in porch lights among others. Are also dimmable with 3-way settings.

Choosing a CFL Bulb

When choosing the kind of CFL bulb to purchase, the following are some of the considerations;

  • Shape;CFLs are available in many shapes that fit various fixtures, choose the most desirable one.
  • Lumen Output; Lumens indicate the amount of light the bulb emits. The lumen output information can be obtained from the bulb package
  • Kelvin (k) number. The kelvin number available on the packaging indicates the level of brightness of a bulb. I.e.2700-3000; indicates emission of soft bright light 3500-6000; more bright light and around 5000; cool white/blue light.

Disposing CFL bulbs

CFL bulbs contain mercury which when not handled properly leads to water contamination and food effects thereby causing health complications. When disposing these bulbs, it is advisable to keep them out of the waste stream
If the bulb breaks accidentally, ensure to keep window open for approximately 20 minutes and clean the mess with a wet rag,thereafter, enclose the broken waste material in a plastic bag and call the recycling center.
Commonly asked questions on energy saving bulbs

Why should I use low energy light bulbs?

Traditional bulbs waste too much energy; actually, only 10% is converted into light. Compared to traditional bulbs, energy saving bulbs last 10 times longer and consume up to 80% less of energy. Less energy consumption means more savings in terms of electricity costs.
In terms of environmental conservation, long lifespan of energy efficient bulbs means reduced dispose hence less space in landfill. Also, less energy consumption means less carbon dioxide gas production.

Energy efficient bulbs cost more. Am I really saving money?

Consider the lifespan; more than ten times the traditional bulbs. This means more than ten additional purchases of traditional bulbs.Also, little energy consumed means low power bills. In the long run, more money and energy saved.

Does lower energy mean less light?

No. some bulbs e.g. the Bio bulbs are regarded as daylight bulbs because of the quality of light they produce. A regular bio bulb of 60 watts produces around 1260 lumens (a unit of measuring light as seen by the naked human eye) which is almost two times that of traditional bulbs.

What should I consider before purchase of an energy efficient bulb?

  • The power emitted in terms of lumens (600 lumens for a 60 watt incandescent bulb)
  • The type of fitting (screw in bulb or bayonet)
  • Lifespan in hours, (Traditional bulbs last for 1000 hours)

Apart from savings, is there another major difference from incandescent bulbs?

Yes. Energy saving bulbs is tailored to suit personal tastes and preferences. They come with different shapes and colors to choose from.

What are the different types of energy saving bulbs?

The most common energy efficient bulbs include; CFLs, LEDs and halogen incandescent bulbs. They can be easily obtained from local hardware and stores.

Energy Efficient Wind Farm

Ways to Improve Home Energy Efficiency

There are many ways to improve on home energy efficiency. Some of the ways are explained below.

1. Insulation

By Insulating home ceilings, attic, floors and walls, draughts and air leakages are prevented ensuring colder summers and warm winters.
Wall insulation; up to 40% of energy lost is through un-insulated walls. Save up to £200 a year and reduce carbon emissions by filling cavity walls.
Insulation by filling cavity walls can be expensive more so if your property is big it is therefore advised to check on available offers and grants before insulating. Also, bear in mind that these offers differ depending on geographical area and income levels.
Loft insulation; poorly insulated roofs and walls can lead to wastage of up to £600 million in a year by pumping heat into the house which escapes due to poor insulation. Loft insulation minimizes this.
Double glazing windows; With double glazed windows, more heat is trapped inside the house thus less pumping of additional heat thereby increased savings on energy.
Double glazing takes care of different preferences since it comes in different styles tailored to suite your home. Before purchase, ensure the windows have a seal of approval from ‘energy saving trust’ an indication of more energy efficiency.
Sealing Draughts and air leakages; Leakages may occur in; electrical outlets, switch plates, window frames, attic hatches, fireplace dampers and baseboards among other areas. Repairs and maintenance is therefore encouraged so as to reduce energy wasted and increase home comfortability. Consider the following simple energy saving practices;

  • Plugging large holes; mostly where the walls meet the attic floor
  • Doing weather-stripping i.e. using fiberglass or foam board to seal the attic access panel
  • Sealing small holes; e.g. around pipes, electrical wires and plumbing vents with the help of caulk or expanding foam

Revamping windows; this can be through;

  • Opening blinds; opened blinds allow natural light into the house. Use of sun light during the day saves on lighting costs and is absolutely free.
  • Multiple panes; double/triple argon gas-filled windows are very effective insulators
  • Also consider weather-stripping between the windows and the frame
  • Replace single pane windows with storm windows. Also those with damaged wood, cracked glass and missing putty should be replaced or repaired.
  • Window edges and cracks can also be sealed with caulk. This is an easy, effective and a very cheap method.
  • Replacing aluminium window frames with vinyl frames as aluminium allows easy heat transfer
  • Tinting windows; to keep out unwanted heat, light and even cold

2. Use of energy efficient bulbs

Almost 15%-20% of home energy is attributed to lighting. Traditional incandescent lights wasted up to 90% of energy by overheating converting only 10% to light. Too much heat emitted causes low lifespan and uncomfortable home environment resulting to additional room conditioning thereby increased additional costs.
Innovation and technology has led to production of Light Emitting Diodes (LEDs) and Compact Fluorescent Lamps (CFLs) which are more energy efficient compared to traditional incandescent bulbs. Other facts on LEDs and CFLs include;

  • Long lasting with reduced amounts of energy consumption
  • Energy saving of up to 80% compared to traditional incandescent bulbs
  • Also Cost effective due to savings made by resulting long life batteries and 3-way settings that replaced the 40 watts, 60 watts and 75 watts.

3. Electrical appliances

Before using any electrical appliance, ensure you have familiarized yourself with how it operates by going through its manual. After that, by using it only when necessary, a lot of energy will be saved.
It is advisable to use efficient electrical appliances so as to cut down on wastage. If you take a fridge for example, its running costs vary from £10 to around £100 depending on how energy efficient it is. Always consider the use of freezers with ‘an energy efficient setting’ as ideal and recommended models.
Consequently using electrical appliances responsibly is highly desirable. Consider the following;

  • Not placing refrigerators in warm areas e.g. near stoves or heat vents as this will lead to more energy consumption in order to remain cool.
  • According to research, computers account for approximately 5% of consumed energy. To reduce this, computers when not in use, should be shut down. Also laptop computers consume relatively less energy compared to desktop computers therefore there use should be upheld to that of desktops.
  • Always use energy star rated appliances I.e. TVs, home theatre systems and players.
  • Unplug phone chargers and laptop chargers when not in use since they consume and waste energy when plugged in.

Also old electrical appliances are inefficient and consume more energy compared to newer models. Replacing them will mean more energy saved in the long run thus reduced power bills. The most recommended appliances to replace include; old model freezers, dishwashers, washing machines and dehumidifiers.

4. Use of daylight

Daylight, which is free and natural light, can be a very good alternative to electrical lighting. Interior home illumination by use of daylight can be achieved through;

  • Use of light tubes; light tubes have a lens that amplifies low level light. The tubes also contain reflective materials for channeling light to where desired and a diffuser for distribution.
  • Clerestory windows; short wide windows set very high on the wall allowing sunshine into the room.
  • Also double pane skylights and light shelves that reflect light back into the room.

5. Cooking smart

When cooking, a lot of energy is wasted. To cut down on this wastage, the following is recommended;

  • Use of convection ovens instead of conventional ovens; convection ovens use fans that forces hot air to circulate evenly enabling cooking at low temperatures thus less energy. Compared to conventional ovens, they use 25% less heat energy
  • While cooking with conventional ovens, it is recommended to place food on the top rack which is usually hotter for faster cooking.
  • Always consider the microwave oven option as they consume more than 80% less of the energy compared to conventional ovens.
  • For quick cooking, always cover food with lids or use pressure cookers
  • The size of cooking pans should be proportional to the flame. I.e. large flames for larger pans.

6. Use of cheaper energy tariffs

Cheaper tariffs mean more savings which can be used for making your home more energy efficient. Some companies, through tariff offers ensure much is saved on energy consumption.
Green energy tariff offer by various companies mean that for any power consumed, there is a contribution from the renewable sources of grid.

7. Use of solar panels

The advantage of a solar panel is that it enables you to generate own power for consumption. The excess power generated or power not utilized at some given time can be sold back to the national grid via a feed in tariff.
Sometimes solar generated energy is used to heat water in tanks thereby reducing the overall cost of power bills. Actually more than 50% of home energy can be generated by solar panels.
The cost of solar panels depends on the size and the amount of energy they generate. A standard one costs around £13000 but some companies offer free panels in exchange of the income generated by selling excess power to the energy grid.
Due to rising fraudulent claims, ensure your panel is approved by the energy savings trust and also exercise caution before power sales to the national grid.

8. Be keen on your energy consumption

Energy monitors, when placed where everyone can see them, indicate the cost of energy consumed. This always is a good reminder to cut back. Most of them are given for free by energy companies or purchased for around £ 40
According to research and statistics, having an energy monitor can help save up to £100 a year by cutting back on consumption.

9. Installing tank-less water heaters

Turning on a hot water tap enables tank-less water heaters to heat water directly without using a storage tank. Cold water passes through a heating unit where it is heat enabling continuous supply of warm/hot water. With tank-less water heating systems, energy losses associated with old storage water heaters is reduced.

10. Water saving shower-head

A lot of water and energy is used by inefficient shower-heads. Actually it has been established that some shower-heads use more water in four minutes that a whole bath. Also if much time is spent on soaping while under torrent of hot/warm water, then off course you are using a lot of energy. Low flow shower-heads which are usually encouraged have a pause button to enable soaping up. They also come with different water flow rates.

11. Eco friendly kettles

Although the initial cost is expensive, a lot of energy will be saved by this type of kettle in the long run. Also by using the kettle to your standard e.g. not boiling a kettle full of water while you only need a cup for tea, cuts down on wastage.

12. Important laundry measures

Laundry machines, if not utilized properly, can cause a lot of energy wastage. When doing your laundry, keep in mind energy conservation methods and practice the following;

  • Wring clothes before putting them back in a dryer. Sometimes consider it necessary to hang clothes on lines.
  • To reduce the amount of time spent on drying clothes, always clean the lint trap before using it
  • Do not use very high temperature settings for cleaning and always start cleaning when you have a full clothes load.

13. Use of Thick curtains

Thicker curtains are considered the simplest yet the most effective way of preventing heat escaping through windows. During longer nights, they make the home more cozy, warm and well protected from cold.
Doors can be insulated by a cheap stick that runs down the sides of draughty doors. This will reduce draught, add warmth to the home and consequently lead to reduced bills.

14. Upgrade your boiler

Inefficient boilers add up to £200 to your energy bill. In addition, they have higher levels of carbon emissions, which are reduced on upgrading.
A scale of A to G is used in boiler rating with ‘A’ being the most efficient and ‘G’ the least. If yours is at the low end of the scale, upgrading or purchase of a different higher scaled boiler is advised.
Other ways of improving energy efficiency in homes include;

  • Use of ceiling fans in place of air conditioners
  • Replacing air filters in heaters and air conditioners
  • Use of programmed thermostats that allow automatic turn off of electrical appliances when nobody is around. This can save up to £200.
  • If possible employ the use of wood stoves to furnaces and always draw curtains over windows at night for better insulation
  • Heating and cooling only rooms that are occupied and closing vents
  • Planting a deciduous tree that provides shade during hot days and allows sunlight during winter since it’s bare.
  • Keeping water heaters at warm temperatures as opposed to hot temperatures

Practice energy conservation by employing any of the above ways and enjoy home comfortability, increased energy savings, reduced bills and above all take part in reducing the impact of climate change and global warming.

Central Heating

Are Electric Heaters Better Than Central Heating?

Central heating

Central heating comes about when heat to every room in the house (resulting from heating water or air) is distributed from a central heat source.

Note: For a video on how central heating works, check this one out and then come back to continue reading:

Different heat sources that can be used for central heating include; gas boiler, wood pellet boiler, air to water heat pump and diesel boiler among others. Central heating from solar panels is very much possible however more set up costs will be required.
Central heating sources have different features as below;

  • Heated water is passed through underflow pipes into the radiator which thereby reduce heat into the home
  • The heat warms objects within the room passively. You do not need to worry about noisy fans and draughts.
  • When the water is heated up to the required temperature level, the boiler modulates/switches off as heat is evenly emitted from the radiator.
  • Modern central heating systems can produce hot water for domestic consumption. Also, they can heat swimming pools and spas.
  • Should be fitted with a time controller to ensure heat is emitted only when needed and also a thermostat which controls the amount of heat supplied to various rooms.
  • For central heating systems with under-floor pipes, they need to be installed before laying the floor slab.

Before choosing on the type of system to install, bear in mind the system efficiency, cost and the type of material used in constructing your home. Also assess the amount of heat required for desired level heating by calculating the approximate heat energy lost via windows, walls, floors and the ceiling.
After drawing conclusions on the amount of heat required and heat loss assessments, choose the most suitable radiator with pipe lengths and spacing for underground heating with respective boiler for installation (for steam boilers). The installation process should only be undertaken by experienced and qualified professional. For efficiency ensure your system is serviced at least annually.
People prefer central home heating because of the following reasons;

  • Efficiency; Compared to other forms of heating, water systems provide four times the amount of heat produced. Also warm air that runs throughout the building provides even warmth distribution.
  • Convenience; Central heating comes with flexibility of being used anywhere. In rural areas where electricity is a problem, propane can be used as an option. Depending on the type of house, the cost and contractor recommendations, different types of central heating systems can be used.
  • Economical; the initial purchase and installation of the central heating system is quite expensive however the savings made in the long run by using the system are worthwhile and they actually recover the initial costs. Modern heaters are fitted with timers to run only when required and thermostats to regulate heat to required levels. Also system pipes are narrow and can back up heat enabling heated water to remain hot for long periods with minimal energy.
  • Central location; heat from one location is distributed equally enabling even distribution to the entire house. The central location can be a utility room or any safe room. This makes this a very secure and safe way of heating the house
  • Controls; central heating systems have thermostats that are programmed. A thermostat allows even temperature regulation and distribution throughout rooms. The system can be turned off in rooms that heating is not required. Also when the heat reaches desirable levels, the system is programmed to shut down automatically.
  • Sources of heat; Central heating system runs on gas, electricity or solar energy among other sources. All these sources give alternatives to choose from for efficiency, convenience and effectiveness.
  • Environmental friendly; Compared to other forms of heating, gas central heating produces less emissions (water and carbon dioxide) becoming cleaner and more Eco-friendly. The convenience of the gas through a pipe means that large tanks of oil that could leak and poison the ground water are not required.

Despite the above merits, drawbacks of central heating include:

  • Higher installation costs
  • Suitable route has to be established through which pipes will pass
  • The central heating unit needs sufficient space for installation
  • It does not offer flexibility to meet changing heat requirements in terms of resizing or moving components.

Electric heaters

Electric Heating is a process by which electrical energy is converted to heat energy. Usually an electric heater (that uses resistors emitting radiant energy) is used in this conversion process. Common uses of heat energy include; cooking, space heating and water heating among others.
Electric resistors in electric heaters work by joule heating. Modern electric heaters use nichrome wire as heating elements.
Sometimes electric heating can be via heat pumps that use electric motor to draw heat energy from the source and produce up to four units of heating energy from each unit of electricity.
When warming house interiors, various space heating methods can be used as below;

  • Radiative heating; by use of a radiative heater with a heating element resembling a light bulb that emits infra-red radiations which are converted to heat energy and by the help of a reflector, reflected directly to heat people and objects. Radiative heaters, though silent, lack overheat protection thus pose a high risk of causing accidental fires.
  • Convection heating; convection heaters heat air by thermal conduction. Warm air being lighter is displaced by cool air which is heat to also rise due to buoyancy. This process continues thereby creating a convection cycle.To create a heat reservoir, convection heaters are sometimes filled with oil.
  • Fan heating; electric fan heaters used are also called forced convection heaters as they speed up airflow reducing thermal resistance between the heating element and the surrounding. Although they speed up heating, the electric fan produces noise while working.
  • Storage heating system; storage heaters store heat at night then release it during the day when required. It is relatively cheap to acquire a reason why it is branded the name Economy 7 in some parts e.g. the UK

Other methods used for electric heating include; electric arc heating, induction heating, and dielectric heating. Produced heat(by induction or dielectric losses) is transferred by conduction, convection or radiation to the work-piece for heating.
Some people prefer electric heating due to the following reasons;

  • Temperature control; easy room by room temperature control is exhibited by various electric heating methods
  • Cost; compared to other heating systems, electric systems and heaters are cheaper and easy to install.
  • Space; electric heaters occupy relatively little space in the house
  • Clean and quiet; no emissions and sounds produced unless when using electric fan heaters.
  • Environmental friendly; despite noise from electric fan heaters, there are zero emissions (carbon monoxide or carbon dioxide) when this method is used. Also natural resources are preserved as wood and fossil fuel consumption is reduced.

Despite the above merits, electric heating possess some setbacks as below;

  • Operational expenses; electric resistance heaters that are used to heat up the room when used for long time periods make the electricity bill unbearable.Sometimes the bill can be two times that of gas.
  • Inefficiency; although very efficient when different methods are used to generate interior heat for buildings, the efficiency levels drop when supplying power plants are included. I.e. more than ten units of fossil fuel is used to produce less than four units of electricity in a fossil fuelled electricity plant. This could have been more effective and efficient if fossil fuel was burned directly by the consumer to produce heat.
  • When space heaters are used in electric heating, humidification, filtration or cooling cannot easily be provided.
  • Also electric hazards are diverse from shocks to faults that can cause accidental fires making it not a very safe process.

Before settling on the type of home heating method to adopt, it is important to do an in depth analysis of benefits and setbacks that come with each system. Central heating however has proved to be the most preferred method because of variety of systems that come with it, lower operational costs and installations even in rural areas where electricity is a problem.

Old Window of House

Benefits Of Modern Double Glazing Windows

Double glazed windows are windows with sealed inert gas in between two glass layers. They have properties that enable them provide insulation twice as much as single glazed windows. They can easily be fitted in older or new homes as well as in commercial properties.
The following are some of the benefits of modern double glazing windows;

Modern Window

I. Cost of Energy

Double glazed windows are used for thermal insulation as they reduce the flow of heat movement (incoming and outgoing), what results is less energy for heating or cooling the house. The more the glass layers, the more the insulation as each layer traps a good amount of heat that passes through increasing protection against heat loss.
Reduced heat loss means less usage of the heating system thus lower energy consumption and reduced power bills. They are also draught proof and this can save a significant amount of money which could have otherwise been spent in draught proofing. Also, low maintenance costs after installation and long lifespan leads to increased savings.

II. Reduced damage to furnishing

This is because double glazed windows reduce the amount of UV light that enters the room. When the heat from the sun is extreme, it can damage in-house furniture, fittings, carpets and paintings.
Minimized UV light transmission reduces interior fading to up to 95%. Laminated and Tinted glass also offers similar benefit (of reducing the UV light penetration) but with reduced clarity to external views. With Double Glazed Windows, thermal drapes that block the exterior view from inside the house are no longer utilized.

III. Improved Security

Compared to other types of windows e.g. Single Pane, Double Glazed Windows are hard to break.When broken, the shards stay intact resisting penetration thereby discouraging intruders and making them a good option for increasing security to your home. The security feature can further be enhanced by incorporating toughened glass in double glazing units.
Consequently, since they are sealed tighter and fitted with safer, stylish hi tech locking systems, opening them from outside is not easy. Thus very effective protection from break ins.
A superior, stylish and improved security windows system with PVC fittings is maintained.

IV. Sound Insulation

This is because of the barrier created between the inside of the house and the outside environment.
Double Glazing works by diluting noise as it passes through the two layers of glass and through the inert gases. This process is very effective and an encouraged investment for those who live in cities, by a busy road/street or beneath a flight path, as it reduces up to 70% of the noise from outside ensuring a calmer, quieter home.
Noise, due to its wave properties can pass through windows by;

  • Vibration; allows easy sound travel through solid objects.
  • Poor seals, cracks or spaces; after entry, it amplifies inside.

High sound levels and noise can inhibit concentration, reduce sleep, cause headache and make one lose the sense of hearing. To prevent these, measure of control must be enforced.
Double glazing windows prevent sound penetration by the above two ways since they are heavy enough to reduce vibration and exhibit minimal air infiltration.
According to research and statistics, the noise reduction effectiveness is also enhanced by the large buffering air cavity that exists between the two glass layers.
The distance between glasses provides depth to the air cavity. The larger the depth, the more sound is insulated.

V. Reduced Condensation

When moisture lands on a warmer surface, it condenses to water droplets which in turn freeze to frost. Frost makes the room colder by lowering the temperatures inside. The inert air between the two layers of glass and the airtight seal blocks up moisture in the cold weather preventing condensation process (even in bathrooms).
With Double Glazing therefore, an improved thermal insulation is exhibited thereby greatly reducing the condensation process maintaining a warmer, drier home.
In older homes, Condensation can cause mould and mildew, damaged window frames and timber rot which can eventually cause adverse health effects. Double Glazing mitigates these effects by reducing excess moisture that collects on window panes

VI. Cold Summers

Heat into the house from sunlight travels via the following methods;

  • Convection; heat transfer by air currents where warm lighter air rises displacing denser air or ‘forced’ convention through breeze. Both processes can also take place concurrently.
  • Conduction; heat travels via a conductor e.g. aluminium or steel among others.
  • Radiation; heat travels directly from the sun

To prevent or reduce the above heat transfer processes during summer, double glazing windows exhibit a low Solar Heat Gain Coefficient (SHGC)to reduce heat effect from direct sun-rays and low u-value that prevents light heated air outside the room from moving inside and cool air inside from escaping through the window.Also trapped heat energy reduces the burning effect through windows in hot sunny days.
Compared to Single Glazing, Double Glazing can reduce solar heat through windows by up to 20%.
Argon filled units and Low-E glass, which contain higher thermal properties can reduce solar heat by up to 50%

VII. Warm Winters

Single Glazed Windows lose up to 70% of heat. As insulators, the depth of inert gas between the two layers of glass prevents cold temperatures from affecting the warm temperatures already existing in the house.
Other glasses superior for this role include; argon filled units and Low-E glass.
During winter, high Solar Heat Gain Coefficient (SHGC)properties enables the windows to allow the heat from the sun be transmitted into the house by convention, conduction or radiation and low u-value prevents the warm heat in the house from escaping.

VIII. Resale value

A home fitted with double glazing windows has an enhanced resale value. Home buyers want homes with sufficient insulation material and these windows make the house even more desirable to house purchasers. They give an old home a better modern look.

IX. Maintenance Costs

After fitting, Double Glazing Windows last for a very long time when still in good initial condition without additional maintenance.Consequently, they are impact resistant therefore don’t break easily, are not affected by strong UV lights, are not affected by termites, they do not undergo warping and no corrosion or paint is needed. All these save on time as a resource, effort and money.

X. Resistant to adverse weather conditions

This property makes them important for use by those living near large water bodies. Double Glazing Windows are not affected by heavy winds, heavy rains and salty air or water. Brocken glass tends to remain intact, still protecting from wind and strong UV light for replacement at a later, more convenient period.

XI. Improved Privacy

This is by the use of tint glass on double glazing creating a darker look, slightly difficult to see through.

XII. Environment friendly

Double glazing ensures more heat is trapped inside the house for longer periods. Thermostats and other room heat heating appliances are kept off leading to lower or no carbon emissions into the environment.
As per research, a three bedroom house with ‘A’ rated windows saves more than 700 Kgs of carbon dioxide gas in a year.
Consider all the above benefits of double glazing windows and enjoy long run reduced costs, improved authentic appeals summed up by comfort, fulfilling and a more relaxing temperature controlled environment,